Does anyone have a Map that I could borrow?

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
gezpacho
MegaSquirt Newbie
Posts: 19
Joined: Tue Oct 21, 2008 4:43 pm

Does anyone have a Map that I could borrow?

Post by gezpacho »

I think I am juat about ready to see if my project starts!

Here's what I have:

1985 Volvo 740 GLE 4-1/2 speed manual
-2.3liter b230f engine
-Natually aspirated-shaved head... alot running around 11:1 comp ratio
-19lb injectors
-factory sensors except tps (95 volvo 850) and gm IAT
-adjustable fuel pressure regulator.
-LC1 WBO2
- MSII v 3.57 from DIYAutoTune I am unsure of the firmware version.

I plan on running this exclusively on e-85.

I know it is a long shot but if anyone has something similar I can use as a start would be much apreciated. I am very new at this and any questions, comments, or critisism is also apreciated.

Thank you,
Juan
Stamperman
MegaSquirt Newbie
Posts: 1
Joined: Sat Aug 16, 2008 11:16 am

Re: Does anyone have a Map that I could borrow?

Post by Stamperman »

Hey! You should post this over at the turbo bricks forum. I bet someone over there will have a map you can copy that will be close.
Post Reply