I know that you can add fuel and retard timing with this feature. Although, can you set an rpm for the nitrous to activate and set an rpm for the nitrous to deactivate? Just like a window switch.
Thanks!
Question about nitrous control
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Question about nitrous control
The spare outputs have a window switch function that can handle this.
Re: Question about nitrous control
By any chance, do you have a wiring diagram on how to set all of this up?
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Question about nitrous control
Spare outputs: http://www.megamanual.com/ms2/spare.htm
Nitrous input: http://www.megamanual.com/mt28.htm#so
Nitrous input: http://www.megamanual.com/mt28.htm#so
Re: Question about nitrous control
Cool, now I just need to figure out how to wire it all to make it work properly.
Anyone run a nitrous setup using the nitrous control?
Anyone run a nitrous setup using the nitrous control?