wiring up a 4.3 vortec
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
smithsandcars
- MegaSquirt Newbie
- Posts: 2
- Joined: Sun Feb 03, 2008 11:57 am
- Location: eagle point oregon
wiring up a 4.3 vortec
im getting ready to help a guy put a 4.3 into a sandcar. he was originally going to try to use the stock wiring and ecu, now were going to use a ms 2. since we have the origanl wiring would you guys suggest i try to use it from the relay board to take advantage of all of the stock connectors aready being there? or would i be better off starting from scratch from the relay board?
Re: wiring up a 4.3 vortec
Yes, If this were my project I would re-use the stock wire harness. When you start buying all the connectors and new wire that can get expensive.