Hi.
Been searching for awhile no and can't seem to find the old thread on this.
Bruce or Al i think built a circuit to compbine individual MAP sensor signals ( mainly for ITB use ) to allow for a better indication of engine load.
The circuit was condenced quite a bit by other users...
Is this thread or info still available somewhere?
And, with the MAP sampling window that is now in the code, is it still enificial?
Working on a 2 cyl. ITB, and even with the map sampling window, it is still a very choppy signal.
Thanks
Joe
Map Mixer??
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: Map Mixer??
The word you're looking for is 'SynchroMAP', viewtopic.php?f=38&t=33901
A recent discussion on the Extra forum suggested that this would work well with and still be a benefit with the new MAP sampling mode.
I sat down with the 'sketch' circuit, and expanded it. If anyone sees anything wrong with this, please chime in!
A recent discussion on the Extra forum suggested that this would work well with and still be a benefit with the new MAP sampling mode.
I sat down with the 'sketch' circuit, and expanded it. If anyone sees anything wrong with this, please chime in!
You do not have the required permissions to view the files attached to this post.
Re: Map Mixer??
THANK YOU!!
I kept typing in "map mixer" and "map sequencer" .....
I kept typing in "map mixer" and "map sequencer" .....