hi
just put the engine in the truck and got my megasquirt sorted but im on the hunt for a map that would get me half way there
any one got any advice that they could help me on my way
regards
Nobby
Suzuki 4 Cylinder map needed
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
kjones6039
- Master Squirter
- Posts: 618
- Joined: Sat Jul 22, 2006 7:02 pm
- Location: Eureka, Nevada USA
- Contact:
Re: Suzuki 4 Cylinder map needed
MegaTune has the ability to produce a VE map based on displacement, torque & horsepower. I have used it many times to produce starting maps with considerable success.
Take a look here:
http://www.megamanual.com/megatune.htm#a1t
Scroll down to mid page to TOOL.
Ken
Take a look here:
http://www.megamanual.com/megatune.htm#a1t
Scroll down to mid page to TOOL.
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Suzuki 4 Cylinder map needed
Also, without posting any details of your setup, you may very well have someone hand you a GSXR-600 map made for a MegaSquirt-II, for your MegaSquirt-I equipped Swift...
Re: Suzuki 4 Cylinder map needed
ah ok
its a suzuki J20 engine i do beleive out of a Grand Vitara
i will be using a edis 4 coil system with megasquirt 2
Nobby
its a suzuki J20 engine i do beleive out of a Grand Vitara
i will be using a edis 4 coil system with megasquirt 2
Nobby