How many inputs are there?

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
gofastant
Helpful Squirter
Posts: 46
Joined: Sun Oct 09, 2005 12:01 pm
Location: Maine

How many inputs are there?

Post by gofastant »

I'd like to add 2 more temp sensors (A/W IC) and 1 more MAP sensor (exhaust backpressure). I see plenty of outputs but how many extra inputs are there? This is on a V3.0 board.

Thanks,

Antony
1990 VW Corrado w/ 2.0 16v - MS2extra, V3.0 board, 2.886 code
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: How many inputs are there?

Post by Matt Cramer »

There are only 2 more inputs - JS4 and JS5 on a V3.0/V3.57 board. Unless you bring the signals in over the CAN bus.
gofastant
Helpful Squirter
Posts: 46
Joined: Sun Oct 09, 2005 12:01 pm
Location: Maine

Re: How many inputs are there?

Post by gofastant »

Thanks for the quick response, Matt. I'd like to get an LSD during this round of auto purchases, it doesn't look like the GPIO will make it in the budget. I think 2 extra will be good for now. EGT's will have to wait.
1990 VW Corrado w/ 2.0 16v - MS2extra, V3.0 board, 2.886 code
Post Reply