I have a Lc1 and my setting ， it's have anything wrong?!
-------------------------------------------------------
file configurator
LAMBDA SENSOR (group)
INNOVATE_0_5_LINEAR--Innovate,PLX 0-5V 10-20:1 AFR
-----------------------------------------------------------
EGO Control
EGO Sensor type
single wide band
controller step size 1%
controller Authority 15%
---------------------------------------------------------
tool~~>ms2 AFR Calibrator
sensor type is
innovate 0-5v
--------------------------------------------------------
and， when my engine run ， i start try to tuning ve table (I sure o2 have feedback)
Tools ~> Autotunen start~
after 5 minute ã€15ã€30 minute ， and I found the ve table didn't change
what's wrong with my setting?!
auto-tune didn't WORK ? ve table did't change?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: auto-tune didn't WORK ? ve table did't change?
Do you have selected any filter?
(VE Analyze Live -> Advanced Settings)
(VE Analyze Live -> Advanced Settings)
Re: auto-tune didn't WORK ? ve table did't change?
I don't have the select3v0 wrote:Do you have selected any filter?
(VE Analyze Live -> Advanced Settings)
because my ms2 is 2.687 v3
how can I do it?!