When I start MegaTune 2.25P3 it always gives me three errors. I'm trying to track them down.
warning:Megasquirt_II.ini:0185 - Conditional Check references undefined value 'EXPANDED_CLT_TEMP'.
Only first reference will be reported.
warning:Megasquirt_II.ini:0347 - Conditional Check references undefined value 'n20'.
Only first reference will be reported.
warning:Megasquirt_II.ini:0567 - Conditional Check references undefined value 'MAPbaro'.
Only first reference will be reported.
I downloaded the file megasquirt-II.ini.2.890 from http://www.megamanual.com/files/ini/ and put it in c:\program files\megasquirt\mega tune 2.25\mtcfg\ and opened megatune config and activated it as per the megamanual and started the new project and the error's persist when I open that new project in megatune.
Can someone please offer some guidance? I'm new to this and would love a little help!!
Thank you,
-Ben
Help troubleshoot some error messages I get when starting MT
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Help troubleshoot some error messages I get when startin
Ben,
This is covered in the text in the blue box here: http://www.megamanual.com/ms2/code.htm
Lance.
This is covered in the text in the blue box here: http://www.megamanual.com/ms2/code.htm
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Re: Help troubleshoot some error messages I get when startin
Lance,
Exactly what I was looking for. This cleared the error messages up. Thank you!
Exactly what I was looking for. This cleared the error messages up. Thank you!