no spark after reinstall
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
no spark after reinstall
I have ver 2.2, with msII and msd ignition. The car was running fine and I removed the megasquirt to configure it for bluetooth. When I reinstalled the squirt, the ignition was on for some reason. Now I have no ignition at all, no spark to the coil. Could I have fried something plugging in the squirt to a live harness? I've checked all fuses, including the ones in the relay box. I'm not using the bluetooth either, still using the computer cable. Any ideas mucho appreciated.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: no spark after reinstall
What circuit are you using to drive the MSD?
Re: no spark after reinstall
Matt, I'm using the optical sensor on pin24, I believe. The motor is a vg30E nissan.
Re: no spark after reinstall
Matt, I received the USB serial connector this week also and it works like a champ. Thanks.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: no spark after reinstall
That would be the input... what about the output circuit?tewbert wrote:Matt, I'm using the optical sensor on pin24, I believe. The motor is a vg30E nissan.
Re: no spark after reinstall
Oops. Peter Florance repaired this one other time for me and I believe he used something more beefy that the transistor listed in the manual. Not exactly sure though.
Re: no spark after reinstall
I'm gonna fire this thing off to Peter and let him check it all out. I'm out of town for a week or so and won't be able to do anything with it. I'll let you know the results.