NEED HELP! MS 3.0

The forum to discuss:
- V2.2, V3 assembly,
- V2.2, V3 troubleshooting, and
- Connection troubleshooting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
dragan
MegaSquirt Newbie
Posts: 4
Joined: Thu Dec 30, 2010 4:35 pm

NEED HELP! MS 3.0

Post by dragan »

please need help i have these typ of MS
Ms230-c
Megasquirt-II ECU w/PCB3.0
Firmware v2.890
Image

Uploaded with ImageShack.us
and one inside of Megasquirt...
Image

Uploaded with ImageShack.us

please need all help about idle valve!
how to conect?
if somebody have a,picture example about wiring a,idle valve!
Top
grippo
Site Admin
Posts: 286
Joined: Mon Feb 16, 2004 6:55 pm

Re: NEED HELP! MS 3.0

Post by grippo »

Have you looked for Idle Valve at www.megamanual.com. It has the information you need - got to the left sidebar, Megasquirt II, IAC. At the bottom of this link it tells how to install and set up a Fast IDle Valve.
Top
dragan
MegaSquirt Newbie
Posts: 4
Joined: Thu Dec 30, 2010 4:35 pm

Re: NEED HELP! MS 3.0

Post by dragan »

thnx grippo! :D
Top
Post Reply

Return to “MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting”