I assembled the MSII step by step, used the stim, everything works great so far. my problem is in the instructions where you are assembling the ignition system. the instructions recommended that I install the VR input and the opti input so I could change over if I ever desired. It mentions adding a jumper to make it work.
so am I all set to use VR (which is what I want now) or do I have to mod it with A jumper?
Want to use GM DIS on my MSII v3
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Flatblackfanatic
- MegaSquirt Newbie
- Posts: 7
- Joined: Sun Sep 11, 2011 4:35 pm
Re: Want to use GM DIS on my MSII v3
Yes you have to add a jumper to make it work also you will need to make a jumper going out too if you want it to control the ignition. I believe it is in detail in the mamual about step 65 or so. There is more answers to this somewhere on their site, I think under wiring.
Robin
Robin