Ok, I have My MS-II built, and wired. I have power to the ECU, and everything works on the stim. Im running EDIS-4 with coil-on-plug. I do not have any spark. I am pretty positive my EDIS is wired right, but I cant figure this out. I am not sure where to start, so any help would be appreciated. I built this for a senior design project and I need the engine running and tuned in 4 weeks. Thanks in advance.
Also, my TPS is at 51-63% at all times even with the engine off. And My RPM's bounce from 0-8000 every second.
A few different issues.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
splatranger95
- MegaSquirt Newbie
- Posts: 9
- Joined: Wed Aug 31, 2011 2:09 pm
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: A few different issues.
spl,
You might want to read the red text in the blue box here: http://www.megamanual.com/ms2/code.htm
Lance.
You might want to read the red text in the blue box here: http://www.megamanual.com/ms2/code.htm
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
splatranger95
- MegaSquirt Newbie
- Posts: 9
- Joined: Wed Aug 31, 2011 2:09 pm
Re: A few different issues.
Thanks man. I was positive I put in the ECU type though. It wants MSI or MSII right? I inserted MSII. Ill go through it again though, and report back. I really appreciate this.
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: A few different issues.
The code doesn't work with MS1, so that's not an option. The question the loader is asking is if you're using a MicroSquirt (=1) or a MegaSquirt-II (=2).
-
splatranger95
- MegaSquirt Newbie
- Posts: 9
- Joined: Wed Aug 31, 2011 2:09 pm
Re: A few different issues.
Ok well Im using MSII and thats what I put in. Maybe I did something wrong. Im trying again friday, so Ill be back to let you know how it goes.