Ok, I've been a member of the forums for a very long time. Most of the time I'm just reading.
But no matter what, I cant find any "Getting Started" help.
How do I decide which MS fits my needs?
How do I know if I need the newest or an older version?
MegaHelp
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: MegaHelp
Only you can decide which version you need based on your own personal requirements. Most of the dealers have FAQ pages which should help you decide.
This is one from the UK:-
http://www.extraefi.co.uk/glossary.htm
This is one from the UK:-
http://www.extraefi.co.uk/glossary.htm
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MegaHelp
What sort of car / engine are you running?
-
positive p
- MegaSquirt Newbie
- Posts: 4
- Joined: Sun Nov 11, 2007 8:32 am
Re: MegaHelp
I'm working on a couple.
The first is a 1975 Ford Maverick with the stock 250ci. L6 that I am building a fuel injection setup for. It will be turbocharged.
The second is a 1979 Type 1 Volksrod with a Porsche 911 3.0L H6, possibly future turbo charging.
The first is a 1975 Ford Maverick with the stock 250ci. L6 that I am building a fuel injection setup for. It will be turbocharged.
The second is a 1979 Type 1 Volksrod with a Porsche 911 3.0L H6, possibly future turbo charging.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MegaHelp
The biggest question is what you will be doing for ignition control.
Our Nova build articles may be a good starting poing.
http://www.DIYAutoTune.com/tech_article ... 1-nova.htm
Our Nova build articles may be a good starting poing.
http://www.DIYAutoTune.com/tech_article ... 1-nova.htm
-
positive p
- MegaSquirt Newbie
- Posts: 4
- Joined: Sun Nov 11, 2007 8:32 am
Re: MegaHelp
I'm not really wanting to run TBI, more Multi Port.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MegaHelp
We've got that covered too - see part 3 of the articles.