Help connecting wires for flyback board Please!

The forum to discuss:
- V2.2, V3 assembly,
- V2.2, V3 troubleshooting, and
- Connection troubleshooting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
ap72
MegaSquirt Newbie
Posts: 1
Joined: Tue Jan 17, 2012 6:44 am

Help connecting wires for flyback board Please!

Post by ap72 »

I bought an "assembled" MS1 v2.2 board with a flyback board but the wires to the flyback board were for some reason cut. Which wires connect where? I have included a picture.
You do not have the required permissions to view the files attached to this post.
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Help connecting wires for flyback board Please!

Post by Matt Cramer »

This link explains what goes where on the flyback board.

http://www.megamanual.com/v22manual/minj.htm#fb
Post Reply