Guys,
I am going down the Stepper valve route (4 wire), I have a seized throttle body with a built in Stepper valve (4 wire) however I do not know what the throttle body is off.
Can you please give me some suggestions for a single throttle body capable of running a 2.0ltr engine with a built in stepper valve. Make and model of vehicle (ps I am in the UK)
Thanks in advance.
Rob
MS 2 V3 Stepper valve/Throttle body
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bobbyspit
- MegaSquirt Newbie
- Posts: 20
- Joined: Wed Feb 24, 2010 2:29 pm
- Location: Eccles. GTR Manchester. England
- Contact:
Re: MS 2 V3 Stepper valve/Throttle body
Ok guys seems I have no answers of any model of vehicle that have an integrated Stepper valve in the throttle body, so I am now looking at sticking with a standard throttle body using a 0 280 140 524 idle control valve.
Or a 0 280 140 501 BOSCH UNIT.
My question is which circuit would this operate from? The Stepper valve circuit or the Fast idle valve?
Does anyone have experience using the above two valves?
Sorry if these questions are basic.
Rob
Or a 0 280 140 501 BOSCH UNIT.
My question is which circuit would this operate from? The Stepper valve circuit or the Fast idle valve?
Does anyone have experience using the above two valves?
Sorry if these questions are basic.
Rob
-
Bobbyspit
- MegaSquirt Newbie
- Posts: 20
- Joined: Wed Feb 24, 2010 2:29 pm
- Location: Eccles. GTR Manchester. England
- Contact:
Re: MS 2 V3 Stepper valve/Throttle body
Admin
you can delete this thread. Sorted a new Stepper valve for my Throttle body, hooked it up and tested all is well.
The Stepper valves set up is very straight forward.
Rob
you can delete this thread. Sorted a new Stepper valve for my Throttle body, hooked it up and tested all is well.
The Stepper valves set up is very straight forward.
Rob