pwm iac step 22 question
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
pwm iac step 22 question
ok, i have the ms 2 v3. i am up to step 22. my question is about the kit or mod i got. does it have everything i need? i have been reading posts and people say you need this and gotta buy this and that. is what i need in the bag? have there been updates in the process? i just do not want to nut this up.. thanks..don
Re: pwm iac step 22 question
Everything you need for a basic MS running B&G code is there. But MS is very versatile and can do more than the basic setup. For example it can drive multiple coils. But only has one coil driver as standard. So only you can decide what spec you want. But you can build the basic one first, then add any mods you want later if needed.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Re: pwm iac step 22 question
thanks for answering my dumb question. i guess i did download and print the wrong manual. i did not have the part that said "if u are using" it says to goto step 62 i think. i did get it printed out thou..thanks for your time. don