befor I start converting to wasted spark coil pack. Im going to use a coil pack from a 2000 jetta, as it has the coil drivers incorp. into coil pk. module. I know I need to mod. MSII for the 2nd ign. out sig. My question is do I select the dual spark option and set the #2 output to -180 deg. or +180 deg. Would also like any input on the coil pack I want to use . They are less than $40 on Ebay and I wont need a seperate coil driver module. PS, I will be using a 36-1 trig. wh. If any one has pin out info on this coil that wold be great. THANKS , NoelGoing distributorless
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Going distributorless
MsII , 3.57, 2.9 firm w. , 4 cyl. V-DUB . Im doing homework befor I start converting to wasted spark coil pack. Im going to use a coil pack from a 2000 jetta, as it has the coil drivers incorp. into coil pk. module. I know I need to mod. MSII for the 2nd ign. out sig. My question is do I select the dual spark option and set the #2 output to -180 deg. or +180 deg. Would also like any input on the coil pack I want to use . They are less than $40 on Ebay and I wont need a seperate coil driver module. PS, I will be using a 36-1 trig. wh. If any one has pin out info on this coil that wold be great. THANKS , Noel
befor I start converting to wasted spark coil pack. Im going to use a coil pack from a 2000 jetta, as it has the coil drivers incorp. into coil pk. module. I know I need to mod. MSII for the 2nd ign. out sig. My question is do I select the dual spark option and set the #2 output to -180 deg. or +180 deg. Would also like any input on the coil pack I want to use . They are less than $40 on Ebay and I wont need a seperate coil driver module. PS, I will be using a 36-1 trig. wh. If any one has pin out info on this coil that wold be great. THANKS , NoelRe: Going distributorless
Here you go.
Pin 1: Gray - A (cylinders 1 and 4)
Pin 2: Switched 12V – from relay
Pin 3: Gray - B (cylinders 2 and 3)
Pin 4: Ground
If it was me I would update the firmware to 3.78 and use the auto trigger setup. This almost makes the toothed wheel setup foolproof.
http://www.megamanual.com/files/code/
http://www.megamanual.com/seq/autotrig.htm
I am not sure which version of Tunerstudio you have to use with the 3.78 firmware, but i'm sure someone will let you know.
Pin 1: Gray - A (cylinders 1 and 4)
Pin 2: Switched 12V – from relay
Pin 3: Gray - B (cylinders 2 and 3)
Pin 4: Ground
If it was me I would update the firmware to 3.78 and use the auto trigger setup. This almost makes the toothed wheel setup foolproof.
http://www.megamanual.com/files/code/
http://www.megamanual.com/seq/autotrig.htm
I am not sure which version of Tunerstudio you have to use with the 3.78 firmware, but i'm sure someone will let you know.
Re: Going distributorless
Thank you Old Guy. PS , old men rule , that is , when the little lady is not at home.