EDIS Ignition logger?

For discussing Phil Tobin's TunerStudio MS is the MegaSquirt edition of TunerStudio, a next generation tuning application. It provides the ability to configure and tune all MegaSquirt controllers and is 100% compatible with MegaTune ini files and msq's.

Moderator: LT401Vette

Forum rules
Post Reply
CygnusX1
MegaSquirt Newbie
Posts: 10
Joined: Thu May 03, 2007 6:03 am
Location: NY
Contact:
Contact CygnusX1

EDIS Ignition logger?

Post by CygnusX1 »

This may be a dumb question but is ignition logging available for use with the EDIS system? If so how do I use it?
Top
kjones6039
Master Squirter
Posts: 618
Joined: Sat Jul 22, 2006 7:02 pm
Location: Eureka, Nevada USA
Contact:
Contact kjones6039

Re: EDIS Ignition logger?

Post by kjones6039 »

To my very best understanding, tooth logging is not possible with EDIS because the sensor/toothed wheel signal is sent to the EDIS module, not to MS.

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
Top
LT401Vette
Master Squirter
Posts: 481
Joined: Sat Jul 16, 2005 7:07 am
Location: Charlotte, NC
Contact:
Contact LT401Vette

Re: EDIS Ignition logger?

Post by LT401Vette »

A Trigger log will generally work with EDIS, but as Ken said there is no visibility to the teeth themselves. You do need to use firmware that supports ignition logging though.
Phil Tobin
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu
Top
Post Reply

Return to “TunerStudioMS”