I have made it to step 55 with all things work. Firmware loaded and Tunerstudio recognized my mega squirt. clock ticked. I start Tunerstudio and I am unable to find "Realtime Display" as a selection.
This seems really basic. Can anyone help
Many Thanks
8803
TunerStudio MS question
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
TunerStudio MS question
1970 Honda N600 600cc Twin
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: TunerStudio MS question
What firmware are you running?
Re: TunerStudio MS question
I loaded the latest per directions. I believe it is Monitor_v2.905.abs.s19. The early test for "clock" works. I jumpered for VR and therefore am not getting rpm. Adjusting variable resistors doesn't seem to help. The needle just whips back and forth. None of my pots function in real time. They do function if I power down and change them and power up. The dials moves. MAP seems to be correct for my sea level and volts are correct. It is the real time issue that is in question.
Thanks for your response.
Thanks for your response.
1970 Honda N600 600cc Twin
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: TunerStudio MS question
Have you set the ECU type under the General menu?
Re: TunerStudio MS question
I do not have a "General" menu that I can find in TunerStudio MS Lite 2.0.8. I looked for where to set the ECU before when I read the trouble shooting notes and could not find it. Is it in one of the Setup programs?
My kit came from you guys and I really appreciate the assistance.
My kit came from you guys and I really appreciate the assistance.
1970 Honda N600 600cc Twin
Re: TunerStudio MS question
Matt
Found it!!!! Under the fuel tab. All pots/gauges functioning now. Disregard the previous post. Not awake yet.
Many thanks for the assist .
Found it!!!! Under the fuel tab. All pots/gauges functioning now. Disregard the previous post. Not awake yet.
Many thanks for the assist .
1970 Honda N600 600cc Twin