vr and hall sensor using together

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Bobbinn
MegaSquirt Newbie
Posts: 1
Joined: Sun Feb 10, 2013 2:10 pm

vr and hall sensor using together

Post by Bobbinn »

I'm am new to me. I have an ms 2 v3
I would like to use the hall input for a cam signal and a vr for the crank
both conditioning circuits are on the pcb but you can only jumper one.

how do I connect both circuits at the same time?
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: vr and hall sensor using together

Post by Matt Cramer »

What code are you using? The B&G dual spark code is pretty complicated to implement on a regular MS2.
Top
DonTZ125
Experienced Squirter
Posts: 337
Joined: Sat May 16, 2009 1:49 pm
Location: Scarborough, ON
Contact:
Contact DonTZ125

Re: vr and hall sensor using together

Post by DonTZ125 »

Also, what wheel pattern are you trying to use?
Top
Post Reply

Return to “Wiring and Sensors”