Hi,
I have a Megasquirt II with 2.25 board and EDIS 4 ignition. I've made an electronic device which cuts the spark directly on the coil, but the signal from the megasquirt to the EDIS(SAW) never stops even on revlimiter with spark cut. Please help me to program the megasquirt to stop the signal during spark cut.
Thanks in advance.
Drigata
MS2 EDIS ignition cut -problem
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MS2 EDIS ignition cut -problem
That is how the code should behave; you would need to rewrite the firmware to add a feature like this.
Re: MS2 EDIS ignition cut -problem
My thoughts are the same, but I can't handle the firmware changes alone. That's why I need help from someone that can change it, or at least guide me how to do it.Matt Cramer wrote:That is how the code should behave; you would need to rewrite the firmware to add a feature like this.
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: MS2 EDIS ignition cut -problem
Why? If you've managed to cut the spark, what does it matter that the MS is still telling the EDIS when to spark? Even if you did cut the signal from the MS, the EDIS will continue to send spark signals to the coil in a 'limp' mode.
