MS2 ver3 code 2.92. Has anyone used the hei8 ref square wave signal (tach) to control two separate ecu's at the same time.
I am running stock gm computer and megasquirt. The gm controls ignition via msd box, controls fuel pump, transmission and TC and injector 12V. Megasquirt controls injector ground and IAC as fuel only. At this time megasquirt gets it tach in signal from the square wave off the MSD tach output. I would like to fool with doing MS ignition control so the above question. If no one knows I will experiment but if someone has done it that info would be great. Just for info my current system controlling the injector ground through a double pole double throw switch allows me to switch between gm fuel control and MS. When using the gm for fuel the MS still does tuner studio presentation for AFR and data logging.
Thanks
hei8 ref signal to two ecu's
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: hei8 ref signal to two ecu's
no it doesn't work straight up. I suppose an electronics guy could make it work with stuff that is above my pay grade.