Hello,
I'm wondering how to setup and/or test the OEM coilpack of a VW VR6 2.9 12V from around 1995.
The Bosch number is 0 986 221 015
I am using TunerStudio 2.5.05
V3 Main with MSII chip
My Firmware is 2.92 Embedded Code By B&G.
Now it is not possible to test it (Only injector testing)?? Or how do I test this coilpack? Before (with other firmware and with MegaTune) I could test everything.
Something else, In my last setup, I had the coilpack connected through the OEM ignitionmodule that is attached to the coilpack, now I took that ignitionmodule off and connected it directly on the coilpack. Is that right? I did this because I red about some problems you could get with it in this topic:
http://msruns.com/viewtopic.php?f=88&t= ... ch#p142769
(The 4th reaction)
Can anyone help me further?
Greets Geert-Jan
VW Vr6 Coilpack Bosch 0 986 221 015 How to?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
VW Vr6 Coilpack Bosch 0 986 221 015 How to?
http://www.golf2g60.tk
^^^Volkswagen Golf 2 G60 Tuned^^^
^^^Volkswagen Golf 2 G60 Tuned^^^
Re: VW Vr6 Coilpack Bosch 0 986 221 015 How to?
I already found out that I used the wrong firmware.....
Preferred Code:
For those requiring a single spark output signal, such as for a distributors or crank wheels (but no cam signal and a single coil), version 2.920 is the preferred choice of codes....
http://www.golf2g60.tk
^^^Volkswagen Golf 2 G60 Tuned^^^
^^^Volkswagen Golf 2 G60 Tuned^^^
Re: VW Vr6 Coilpack Bosch 0 986 221 015 How to?
Now I still want to know the following:
In my last setup, I had the coilpack connected through the OEM ignitionmodule that is attached to the coilpack, now I took that ignitionmodule off and connected it directly on the coilpack. Is that right? I did this because I red about some problems you could get with it in this topic:
http://msruns.com/viewtopic.php?f=88&t= ... ch#p142769
(The 4th reaction)
Are there no modifications needed to my MS board?
In my last setup, I had the coilpack connected through the OEM ignitionmodule that is attached to the coilpack, now I took that ignitionmodule off and connected it directly on the coilpack. Is that right? I did this because I red about some problems you could get with it in this topic:
http://msruns.com/viewtopic.php?f=88&t= ... ch#p142769
(The 4th reaction)
Are there no modifications needed to my MS board?
http://www.golf2g60.tk
^^^Volkswagen Golf 2 G60 Tuned^^^
^^^Volkswagen Golf 2 G60 Tuned^^^