I am a First-Timer loosing sleep & anxious to "get-it-right".
I am working on a MegaSquirt 11 v3 Kit, to run a BMC 1800 engine. I have a Ford EDIS 4 system all set up, & running the Engine--the JimStim is built up-- I am up to down loading TunerStudio to check the next construction stage.
The under hood gear is all built--the induction assembly--relays & fuses--sensors and the wireing harness is complete up to the DB37.
We use an Apple Computer--seems that it is incompatable with the MegaSquirt XP system.
So a friend has come to my rescue with an XP lap top.
It would great to communicate with someone who is up to speed with MegaSquirt 11 kit building. Unfortunately I find inderstanding some of the construction details as worded, confusing.
I do not want to worry "Matt", over my minor items, would perhaps be an impost, on his valuable time.
Is there someone out there, doing a 11 v3 system on a BMC engine, who might even be in Australia--who would be prepared to yarn with me?
I build Radio circuits o.k., Fitting and machining is easy.
iangaycowen@gmail.com Ian Cowen. Gold Coast Aust.
Another newby, tearing out his hair.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Another newby, tearing out his hair.
Ian,
Another resource you might wish to look into is the MS Users Group in AUS. They are somewhat sporadically active at MSGroups.com
Another resource you might wish to look into is the MS Users Group in AUS. They are somewhat sporadically active at MSGroups.com
Forum Admin Team
Be sure to read Forum Rules here
Be sure to read Forum Rules here
Re: Another newby, tearing out his hair.
Lots of MGBs using MS so you should get help easily.
No problems asking basic questions about assembly - every one has to start sometime.
One mistake I made early on was to look at both the B&G and Extra instructions. The answer is to decide which you're going to use and ignore the other.
No problems asking basic questions about assembly - every one has to start sometime.
One mistake I made early on was to look at both the B&G and Extra instructions. The answer is to decide which you're going to use and ignore the other.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband