clio 172 trigger angle

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
deek25
MegaSquirt Newbie
Posts: 1
Joined: Mon May 04, 2015 11:45 am

clio 172 trigger angle

Post by deek25 »

hi

im new here and new to megasquirt, i have fitted it to a renoult clio 172 that i have built for a friend, i have managed to get the car to start however it does not run correctly, what im wondering is does anybody know the angle of the missing teeth at tdc? i know the trigger angle is 90 bftc but at tdc is the trigger ie the missing teeh 90 before the sensor? as im not sure if to set the trigger angle on the ecu to 90

any help would be great

Thanks

David
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: clio 172 trigger angle

Post by Matt Cramer »

Best way to check is with a timing light. If you don't have timing marks, you'll need to paint them on.
Top
Post Reply

Return to “MS-II Ignition Setup, Tuning, and Troubleshooting”