Video of my MS'ed and GPIO'ed Jensen Interceptor

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Philip Lochner
Helpful Squirter
Posts: 96
Joined: Thu Feb 16, 2006 5:18 am
Location: South Africa
Contact:
Contact Philip Lochner

Video of my MS'ed and GPIO'ed Jensen Interceptor

Post by Philip Lochner »

A good friend made a video of my '74 Jensen Interceptor (Chrysler 440) which I EFI-ed with MS2 and with its transmission upgrade using GPIO as transmission controller:

https://www.youtube.com/watch?v=4ot1LXUpMUA&t=320s
Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Top
kholman
Site Admin
Posts: 127
Joined: Sun Dec 24, 2006 5:56 pm

Re: Video of my MS'ed and GPIO'ed Jensen Interceptor

Post by kholman »

Philip,
Might be worth sharing at msruns.com also.
Top
Post Reply

Return to “General Information”