I have been running MS2 fuel only for a few years with no issue. Now working on ignition. Controller has been wired correctly for direct coil and has the proper full up parts. Works on the sim. When i hook up the ignition wire to the negative side of the coil and run 12v to the positive side I cant get any spark. I have a crank trigger for ignition input but cant get it to spark to save my soul.
What do I need to check next or is there someone close to Illinois to lend a hand.
thanks
Keith
directo coil ignition issue
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: directo coil ignition issue
Are you seeing an RPM reading on TS when attempting a start?
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Re: directo coil ignition issue
Will have to be some more testing but for now the car has been put back to fuel only. Power Tour starts next week so back to the tried and true fuel only mode. Not sure on a lower horsepower normally aspirated engine how much I will gain by converting to computer controlled ignition.