VW 16V Coil Powerstage

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
moteleb
MegaSquirt Newbie
Posts: 6
Joined: Sat Nov 19, 2005 11:52 am
Location: Montréal,qc,ca

VW 16V Coil Powerstage

Post by moteleb »

This question is for VW 16V users.

Is it possible to set an 16V ignition with stock Coil powerstage (1990 1/2 &+)?
For the moment I have exactly the same setup as MSII website (Bosch 024) It working perfect in normal condition but I have some hot-cranking problem. I put the same Dwell settings like a good working Passat 3.5ms I think but this passat have the coil powerstage, not mine.

Thanks all and Have an happy new year!
Squirter since July 2003.
moteleb
MegaSquirt Newbie
Posts: 6
Joined: Sat Nov 19, 2005 11:52 am
Location: Montréal,qc,ca

Post by moteleb »

Sorry!

I have MSII on a 2.2board.
Squirter since July 2003.
Post Reply