Can fuel injector coils wear and give poor idle and output?

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
mxmang
MegaSquirt Newbie
Posts: 17
Joined: Sat May 27, 2006 3:56 am
Location: Saskatoon Sask Canada
Contact:
Contact mxmang

Can fuel injector coils wear and give poor idle and output?

Post by mxmang »

Hello there. I am under the impression my injectors from 1990 are wearing and whatnot....this seems like a simple question but....

Do injectors suffer from fatigue ? I would assume they would after several years of usage with warm ups and cool downs...

My idle is pretty solid but it still wanders and hunts and runs rough sometimes. I am wondering if it is mostly due to the fact that the injectors are worn out.

Any advice would be great as I would like to improve the idle performance of my engine! :)
Top
mxmang
MegaSquirt Newbie
Posts: 17
Joined: Sat May 27, 2006 3:56 am
Location: Saskatoon Sask Canada
Contact:
Contact mxmang

Post by mxmang »

much thanks... :)
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”