Hi everyone,
I'm looking for some 2" ID, 45 degree elbows that can be downstream of the injector. This is for an ITB setup to attach the throttle bodies to the manifold. The injector will be just upstream of the elbow so I'd like to be sure the elbow is resistant to hydrocarbons. I'm told that nitrile rubber or flourosilicone would be the best materials. Does anybody know of a source for elbows made of either material?
Thanks,
Robert
Fuel Resistant 45 Degree Rubber/Silicone Elbows?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
73Inka2002
- MegaSquirt Newbie
- Posts: 30
- Joined: Sat Sep 18, 2004 2:21 pm
Fuel Resistant 45 Degree Rubber/Silicone Elbows?
Car Info:1973 BMW 2002
MS Info: MSII v3.0, Code 2.871t4b (beta), MegaTune 2.25, EDIS-4, Innovate WB, Suzuki GSX-R Individual Throttle Bodies
MS Info: MSII v3.0, Code 2.871t4b (beta), MegaTune 2.25, EDIS-4, Innovate WB, Suzuki GSX-R Individual Throttle Bodies
-
Jack
- MegaSquirt Newbie
- Posts: 34
- Joined: Sun May 02, 2004 7:34 am
- Location: Washington State - the wet side
While they do not have them on his site, you may try call in http://www.intakehoses.com/ to see if he can get what you need.
I've bought from them and was very happy with the product and service, but have no interest in the business.
Jack
I've bought from them and was very happy with the product and service, but have no interest in the business.
Jack
1960 Triumph TR3 - To be squirted soon
1980 Triumph TR8 - Success story: http://www.msruns.com/viewtopic.php?p=142363#142363
1980 Triumph TR8 - Success story: http://www.msruns.com/viewtopic.php?p=142363#142363