Page 1 of 1

Injector Wiring for 8 Inj and 4 Cylinder Engine

Posted: Wed Sep 19, 2007 4:18 am
by madman4
Hi,

I plane to use Ducati 996 TBI with dual Injector on a VW Flat4 engine.

The firing order is 1-4-3-2.

How i must wire the injector by pair/cylinder ?
Or like a V8 engine by cylinder bank?
Or Paired Inj ? (1-1 & 2-2 & 3-3 & 4-4)

They're low Impedance.

Thx
Patrick

Posted: Sat Sep 22, 2007 4:17 am
by 78Spit1500Fed
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0) .

My gut says "bank" like injector set 1 on one bank, injector set 2 on the other... it depends entirely on how their purpose, however, and you're going to need some kind of dual table code.

-Brian