EDIS coilpack connector

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
yrkesman
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 19, 2004 10:57 pm
Location: Finland, Turku

EDIS coilpack connector

Post by yrkesman »

What model is the EDIS coilpack connector? Is it possible to get new connectors from somewhere?
Top
yrkesman
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 19, 2004 10:57 pm
Location: Finland, Turku

Post by yrkesman »

I noticed that http://trigger-wheels.com/ do sell them but is there any other place to find them?
Top
66fb

Post by 66fb »

Go to the right side, click on connectors....


http://rjminjectiontech.com/?p=3


AL
Top
yrkesman
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 19, 2004 10:57 pm
Location: Finland, Turku

Post by yrkesman »

Jim wrote:Any pull it yourself junk yard .

...................Jim
Yes, but those are not new. I'm not saying that used isn't an option, but if there are new ones available, I would rather use them. Even better if I can get them for good price.
Top
yrkesman
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 19, 2004 10:57 pm
Location: Finland, Turku

Post by yrkesman »

Jim wrote:Sorry , I didn't notice you were in Finland ,
they might not be as plentiful there .

...................Jim
There's alot of those used connectors here since the edis ignition is also used in european model fords.
Top
66fb

Post by 66fb »

I posted a link for NEW connectors...

http://rjminjectiontech.com/?p=3

AL
Top
yrkesman
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 19, 2004 10:57 pm
Location: Finland, Turku

Post by yrkesman »

66fb wrote:I posted a link for NEW connectors...

http://rjminjectiontech.com/?p=3

AL
Yep, thanks for that. But I think I saw somewhere on their website that they wont send them outside States. I actually got myself a new connector from UK, for a good price. So this thing is now taken care of.
Top
Post Reply

Return to “Wiring and Sensors”