Hi all,
Could anyone advise me of the 'Idle valve frequency' of a Bosch 2 wire PWM Vavle please ?
I understand closed dc is 25% - but need the other setting please ??
Nige
2 wire bosch
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
2 wire bosch
on www.LR4x4.com (Land Rover forum post under Hybrid_From_heck)
-
Hey_Allen
- MegaSquirt Newbie
- Posts: 23
- Joined: Wed Dec 19, 2007 4:58 pm
- Location: Tacoma, WA
- Contact:
Re: 2 wire bosch
Looking for similar information, I just came across this thread viewtopic.php?f=71&t=11001 which seems to go into some good detail on the subject.
Now I just have to make sure that my valve is the same general type and go apply this learning.
Happy tuning!
Now I just have to make sure that my valve is the same general type and go apply this learning.
Happy tuning!