anyone tuning a 2.0 turbo project

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
bigrob
MegaSquirt Newbie
Posts: 1
Joined: Thu Jun 05, 2008 7:18 pm

anyone tuning a 2.0 turbo project

Post by bigrob »

Here I go with the latest MS equipment on my bmw M10 turbo - anyone starting a similar project to share idea's as tuning progresses. MSII, wide band, edis, I'm a good engine guy but the computer stuff is bogging me down .
devastator
Experienced Squirter
Posts: 333
Joined: Mon Feb 11, 2008 10:19 am
Location: Kinda near Tucson Arizona

Re: anyone tuning a 2.0 turbo project

Post by devastator »

Have you looked through the success stories yet? There might be someone there with a similar set-up.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished. :twisted:
Post Reply