no spark from MSD and no RPM
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
no spark from MSD and no RPM
I pulled my MS (MSII ver 2.2 w/ relay board) from a running car, upgraded to the 2.886 code, added a flyback board and reinstalled. Now I get no rpm in megatune and no spark from the msd (which tested good). I'm running a stock Nissan optical distributor and have changed nothing from the original wiring. Don't quite no where to go from here.
Re: no spark from MSD and no RPM
After talking with Peter Florance, I also confirmed the white wire from the MSD is connected to pin 11 (relay box) pin 36 on the MS and the wire going to the dizzy is connected to pin 15 (relay board) or pin 24 on the MS. While cranking, megatune shows "not cranking" on the main page.
Re: no spark from MSD and no RPM
Answered my own question. Under advanced ignition settings, "somehow?" the trigger wheel tooth setting had 36 and since I'm not using one, I reentered 0 and it started right up. Sorry, for bothering, guess it helped to think out loud.