Cut the 12V feed to flyback, wont connect now?
Posted: Sat Apr 25, 2009 9:02 am
I had issues with noise being brught in to the tachinput from the injectors, I run them PWM.
Cut and rerouted the 12v raw feed to the flyback TIP125's, made a big difference but I noticed that if I dont have this connected for example on the stim the cpu wont start up?
It doesn't help that I hook it up after the normal 12V feed, it has to be before or at the same time for the cpu to start up?
Is this a sign of some other problem or normal?
Cut and rerouted the 12v raw feed to the flyback TIP125's, made a big difference but I noticed that if I dont have this connected for example on the stim the cpu wont start up?
It doesn't help that I hook it up after the normal 12V feed, it has to be before or at the same time for the cpu to start up?
Is this a sign of some other problem or normal?