I am looking for a reasonably priced decent quality tool to crimp the Bosch/Amp connectors. Amp calls them Junior Timer or Junior Power Timer.
http://www.eagleday.com/ampconnectors.html
The above link shows the connectors and halfway down has a non-ratcheting crimp tool for $30. It's the only one that is specfically billed as being for this that is not over $200. Amp sells a tool (Ergocrimp) that is $175 for the frame, and I could not find a price for the proper jaws. MSD sells a crimp tool that has a set of jaws for "Amp pin terminals", I suspect that might be what I am looking for but can't fins any more specific data form MSD. The following link shows this tool and the available jaws.
http://www.hrpworld.com/index.cfm?form_ ... on=product
So has anyone used these tools and give a recomendation? Or give me another suggestion a about a tool to use? I may get the MSD tool anyway for other connectors, if anyone has used it please give your opinion of it.
Thanks
Bosch Crimp Tool
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Ollie8974
Re: Bosch Crimp Tool
I have and use the same tool as the Bosh Double Crimp Tool ECT-100 and a pair of needle nose to crimp Weather pack pins.
Re: Bosch Crimp Tool
Is it the a similar tool or exactly that one? Do you know if it is actually a tool specifically for this? Are you happy with the way it crimps?
Thanks
Thanks