Hi, I need some help.
I have a V3 board with MSII Daughtercard mounted.
Suddenly my TPS does not work anymore. It reads out 117% in Megatune. When I try to calibrate it, and try to Get Current value it reads out 1024 when the throttle is off.
I have meassured the TPS with a multimeter, and it works just fine.
I have also tried to reprogram the ECU without any luck.
Can anyone give me some tips on whats wrong???
Oystein
TPS trouble
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
oysteinbno
- MegaSquirt Newbie
- Posts: 5
- Joined: Sat Jan 22, 2005 1:24 am
- Location: Mosjoen, Norway
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: TPS trouble
What results does it get on the Stimulator?
-
oysteinbno
- MegaSquirt Newbie
- Posts: 5
- Joined: Sat Jan 22, 2005 1:24 am
- Location: Mosjoen, Norway
Re: TPS trouble
When I hook the stimulator on to the ECU, it resets the ECU all the time...
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: TPS trouble
That's even stranger. What are you powering the Stim with?
-
oysteinbno
- MegaSquirt Newbie
- Posts: 5
- Joined: Sat Jan 22, 2005 1:24 am
- Location: Mosjoen, Norway
Re: TPS trouble
I use a 9v battery.
But I hooked the ECU into the car again, and now it works just fine... Strange......
But I hooked the ECU into the car again, and now it works just fine... Strange......