MS 2 V3 board problem 1

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
dimi3
MegaSquirt Newbie
Posts: 14
Joined: Sat Jul 04, 2009 9:40 am

MS 2 V3 board problem 1

Post by dimi3 »

Hi all, First of all happy new year to all.

I have a problem, I have the MS 2 v3, and I am confused which software to use. I mean I can load different softwares which came as standard with the V2.25 download. The main tabs are different etc.
If I want to use my ecu on a toyota 5efte engine with a T2.8 (18 psi boost) turbo and 440cc injectors, can anyone tell me which program of megasquirt do I need to use please.
I was looking in tuning MAP VS RPM.


P.S My MS was bought as a kit and it was soldered by a friend - which he guaranteed that its 100% perfect, and that I believe him.
Since I am a new beginner on the MS 2, I think that this will not be my first post :RTFM: .
Thank you
Top
dc
MegaSquirt Newbie
Posts: 17
Joined: Sat Nov 25, 2006 4:28 pm
Location: Lake Stevens,WA

Re: MS 2 V3 board problem 1

Post by dc »

I would start here http://www.megamanual.com/ms2/code.htm and use the 2.88 code, there is no code for any specific build it needs your input and tuning to tailor the code for your application. Read read read take your time and read the manual and become familiar with it there is lots of info. Do you have a stim http://www.DIYAutoTune.com/catalog/prod ... ucts_id=30 this will help in a lot of ways testing code and MSII if you think there is a problem.
49 Willys panel wagon, 383stroker, Hilborn EFI conversion,msII v3 EDIS, GPIO 4L80E Image
Top
dimi3
MegaSquirt Newbie
Posts: 14
Joined: Sat Jul 04, 2009 9:40 am

Re: MS 2 V3 board problem 1

Post by dimi3 »

I did go trough the manuals but I get confused since I don’t even know exactly which board do I have. (The problem was I bought this ECU like 2 years ago and I could not install it, and know I got time and started the project again, therefore I lost every data I had on copy and in mind - and know new thing got out, and others are updated and I cant get my mind st8 again.).

So you said to use the 2.88 code, is that number the same that gets displayed when you connect the MS, because mine is 2.86. Do you think I should update?
And still may I ask, if I keep the V 2.86 is there specific software for V2.86 or if I update is there a software for the V2.88?

And yes I do have the Mega stim its V2.2. When I connect to the laptop I see that battery is ok, fuel pump working and TPS working, even I did some tests on running the Stim with an external distributor and all was good. (therefore I think I don’t have any trouble with the ecu.) I just got confused with all the different types of GUI softwares.

Thank you very much, every bit is mostly appreciated.
Top
8974Ollie
Helpful Squirter
Posts: 82
Joined: Tue Oct 13, 2009 4:35 pm

Re: MS 2 V3 board problem 1

Post by 8974Ollie »

This is the link to all the MegaSquirt Manuals.
http://www.megamanual.com/index.html
Top
8974Ollie
Helpful Squirter
Posts: 82
Joined: Tue Oct 13, 2009 4:35 pm

Re: MS 2 V3 board problem 1

Post by 8974Ollie »

Read this manual.
http://www.megamanual.com/ms2/configure.htm
Top
dimi3
MegaSquirt Newbie
Posts: 14
Joined: Sat Jul 04, 2009 9:40 am

Re: MS 2 V3 board problem 1

Post by dimi3 »

Thank man. Hope I ll get sorted. For know I thank you alot.
Top
Post Reply

Return to “Tuning Fuel and Air”