Please share your knowledge
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Please share your knowledge
I am building a 5.3Gen3 chevy to go in a 280z I am going to use a msd unit to control the spark it has the ability to retard the timing as the boost rises what I need is a FI unit to take care of the fuel side of things .I would like to use a Infinity Q45 throttle body on a 4 bbl intake with a elbo.What mega squirt unit do I need? or any suggestions you might have are appreciated Thanks
-
elturbonitroso
- MegaSquirt Newbie
- Posts: 15
- Joined: Thu Jan 05, 2006 7:26 pm
- Location: CONNECTICUT
Re: Please share your knowledge
any megasquirt will work on your set up if i was you i would get a ms2 v3 board and let the ms do the spark control.just my 2 cent