Warmup Enrichments Problem
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
bubba1978
Warmup Enrichments Problem
I am using MS Tuner studio to tune my MS2 and for some reason the WUE indicator never turns off. Even when the value is below 100%. Is this normal? Also, i'm trying to understan what's going on. If I am still runnig rich after warmup and my bin values for my warmup are below 100% does that mean I need to lower my main fuel map and raise my bin values to 100% on my warmup enrichments?
Re: Warmup Enrichments Problem
The last value in your warmup enrichment table has to be exactly 100% or the WUE will not turn off. In addition, the coolant temperature has to be greater than the last temperature in the table.