MSefi.com read only forum (Jan.15,2018)

Hi ther megatuners. I am new to this forum and struggles a little with my first megasquirt project. The car is a Peugeot 306 with a 1.9L 8v (xu9JA) and megasquirt 1 with PCB 2.2

The problem i have is that the ECU don't connect to the Megatune 2.25 Does any one know if its the ECU or the softwear that is the problem
The ECU Injectors and Warm up LEDs blinks when the key is turned on. Is this right?

Do you have a Stim?

If not, this is another strong case for all MegaSquirters to have one. Perhaps you could borrow one?

From there I would suggest making certain you are using the correct serial port.

Ken

kenny,

There are all sorts of tips here: http://www.megamanual.com/connect.htm

Lance.

kjones6039 wrote:Do you have a Stim?

If not, this is another strong case for all MegaSquirters to have one. Perhaps you could borrow one?

From there I would suggest making certain you are using the correct serial port.

Ken

I just ordered a stim from DIYAutoTune, but havent recived it yet. looking forward to recieve it. hope this helps me.