tach signal comes and goes

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
smithsandcars
MegaSquirt Newbie
Posts: 2
Joined: Sun Feb 03, 2008 11:57 am
Location: eagle point oregon

tach signal comes and goes

Post by smithsandcars »

im running a ms2 on a chevy 4.3 v6. im running the port injectors but a tbi era dizy. the ms is configured as per diy autotunes hei mod kit. it randomly has a tach signal and then if it sits over night it wont come back unless we change the module in the dizy. i dont know if something is burning them up or what. does anyone know a way to test them other than put them in a known running car? and if it is burning them up what could couse this? also is there any suggestions on trouble shooting the tach signal? thanks for any help.
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: tach signal comes and goes

Post by Matt Cramer »

How much dwell are you running?
Post Reply