Hi everyone,
I'm going to be running individual throttle bodies that have a bung for a fuel injector that I would like to plug because I will be using the injector bungs that are built into the cylinder head instead. I searched around and found these (http://www.efihardware.com/products/645 ... lug-single), but they're in Australia and I was hoping to find something locally. Does anyone know where to get something similar or maybe another idea for plugging unneeded injector bungs?
Thanks!
Robert
Injector Bung Plug
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
73Inka2002
- MegaSquirt Newbie
- Posts: 30
- Joined: Sat Sep 18, 2004 2:21 pm
Injector Bung Plug
Car Info:1973 BMW 2002
MS Info: MSII v3.0, Code 2.871t4b (beta), MegaTune 2.25, EDIS-4, Innovate WB, Suzuki GSX-R Individual Throttle Bodies
MS Info: MSII v3.0, Code 2.871t4b (beta), MegaTune 2.25, EDIS-4, Innovate WB, Suzuki GSX-R Individual Throttle Bodies
-
devastator
- Experienced Squirter
- Posts: 333
- Joined: Mon Feb 11, 2008 10:19 am
- Location: Kinda near Tucson Arizona
Re: Injector Bung Plug
You could use epoxy or JB weld if you don't ever plan on using those bungs again. Otherwise, PM me and I can make you some.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished.
MS-II W/spark burning E85
The sand must be punished.