No firmware loaded error? 911 Porsche
Posted: Mon Feb 07, 2011 5:23 pm
I am posting here in hopes that I can overcome this error. We are attempting to use the megasquirt to install fuel injection on a 911 Porsche 2.0 flat 6.
I initially tried to install the experimental turbo controller but after powering on the unit the Transistor was smoking so we removed it. Now we are using a alternative for the turbo and want to use the megasquirt in fuel only mode. TunerStudio says that the megasquirt has no firmware installed. When turning on the ignition switch the three lights do blink.
Code: Select all
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Local User/Desktop/Monitor_v2.891.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db420
File read successfully.
Opened comm port 3 at 115200.
ERROR: Unknown error status response, e=0x21
Elapsed time: 0.25 seconds
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Local User/Desktop/Monitor_v2.891.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db420
File read successfully.
Opened comm port 3 at 115200.
ERROR: Unknown error status response, e=0x21
Elapsed time: 0.26 seconds