Page 1 of 1
Ignition time can't be changed
Posted: Thu Feb 17, 2011 12:33 am
by nk920605
G'day
My MegaSquirt's type is "MS2357-C"Megasquirt-2 ECU w/PCBv3.57"Fiemware V2.888"
useing bosch 0 227 100 124 to igintion
We use oscillograph to scan the timing changed
Frist cranking rpm is 300rpm,the trigger offset and ignition table is working.(right position)
But when cranking rpm is more than 300rpm,the question is come,ignition timing always keep wrong position
trigger offset and ignition table is just like not work...
Re: Ignition time can't be changed
Posted: Thu Feb 17, 2011 6:17 am
by Matt Cramer
Please post a MSQ, and a data log of the ignition timing being "stuck" if you have one.
Re: Ignition time can't be changed
Posted: Fri Feb 18, 2011 12:01 am
by nk920605
This PNG is our record of waves
P.S:How to post my MSQ in the forum
(I know this is very stupid question....)
Re: Ignition time can't be changed
Posted: Fri Feb 18, 2011 4:59 am
by Matt Cramer
nk920605 wrote:This PNG is our record of waves
P.S:How to post my MSQ in the forum
(I know this is very stupid question....)
Below the Save - Preview - Submit buttons, you will find a pair of tabs marked "Options" and "Upload Attachment." Click the Upload Attachment tab. Then click the "Browse" button that appears. A file open dialog box will pop up. Select the file, then click Open. Then fill in the description in the field below the file name. Once you have all that, click Add the File. Repeat this, starting with "Browse," to add more files. Once you have these all attached, you can enter your post and the files will be attached.
Re: Ignition time can't be changed
Posted: Thu Mar 17, 2011 12:28 am
by nk920605
Here the MSQ is , please solve our problem , thanks . = )
Maybe our problem is easy to you, but it's important to us . = (
Re: Ignition time can't be changed
Posted: Thu Mar 17, 2011 5:18 am
by Matt Cramer
First, I see you're running 2.6x firmware - I'd upgrade to the latest stable release, first.