Fuel Pump wont turn on

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
machwon
MegaSquirt Newbie
Posts: 1
Joined: Sat Apr 30, 2011 4:33 pm

Fuel Pump wont turn on

Post by machwon »

Help

I just installed my preassembled MS V3.57 kit for my 89 Mustang. I had the car running but it was a little rich and tried to adjust the fuel settings first. Then I got a config error using tunerstudio on the rpm gauge. I checked and double checked everything, I cant find what the heck happened and Im very frustrated. I tried using megatune but I get a code mismatch error. Car will not start, confirmed the fuel pump does not come on. I tested it on the EEC diag connector and it works fine.

Any help appreciated.
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Fuel Pump wont turn on

Post by Matt Cramer »

I'll need to check your settings. Could you please post a copy of your MSQ file? This sounds like a configuration error.
Top
Post Reply

Return to “MS-II Ignition Setup, Tuning, and Troubleshooting”