I am at the early stages of injecting an air cooled two cylinder engine as used in the Citreon 2cv. I am planning on using the throtle body from a Daewoo Matiz for no good reason other than someone else has already used this. Does anyone know how I can find out the type of idle valve that it uses?
Cheers
Robin
How to determine the idle valve type
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Martinclan
- MegaSquirt Newbie
- Posts: 1
- Joined: Sat Jun 11, 2011 11:37 am
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: How to determine the idle valve type
How many wires connect to it?
2 or 3, probably PWM, 4, 5, or 6, it's a stepper.
2 or 3, probably PWM, 4, 5, or 6, it's a stepper.
