AEM Uego Signal Problem
Posted: Thu Sep 29, 2011 9:21 am
Hi everyone.
Car is 95 Eagle Talon, 420a with all the works. Anyway, I just wired in my MSII this week and am trying to iron out some issues. It seems that my MS isn't reading the 0-5V analog signal coming from my AEM unit (white wire). I have the white wire on the AEM going to the pink O2 wire on the MS harness. Gauge works fine like it always has but in TunerStudio the A/F gauge is very irradic and bouncing around the 16-17 mark no matter the condition. I tried calibrating to the preset AEM mode and nothing changed. Any input is appreciated. Thanks.
Car is 95 Eagle Talon, 420a with all the works. Anyway, I just wired in my MSII this week and am trying to iron out some issues. It seems that my MS isn't reading the 0-5V analog signal coming from my AEM unit (white wire). I have the white wire on the AEM going to the pink O2 wire on the MS harness. Gauge works fine like it always has but in TunerStudio the A/F gauge is very irradic and bouncing around the 16-17 mark no matter the condition. I tried calibrating to the preset AEM mode and nothing changed. Any input is appreciated. Thanks.