Page 1 of 1
BMW M50 No Start
Posted: Thu Oct 13, 2011 4:36 pm
by Wheelandrimrepair
Hello Megasquirtees I am new and just put it on my boosted 1992 BMW. I have MSII V 3 Board and it will not start. I have Spark, and Injector pulse but it seems to be kicking back on cranking. I adjusted every setting under the sun up and down, to no avail. Can I get a good pointer, kinda outa ideas here, worn out! about to put it to the side again
Re: BMW M50 No Start
Posted: Thu Oct 13, 2011 4:55 pm
by kjones6039
Where is your initial timing set? Your description sounds like it is too far adavnced.
Ken
Re: BMW M50 No Start
Posted: Fri Oct 14, 2011 3:55 am
by Wheelandrimrepair
Initial Timing setting? hmmmm To be honest I do not know if I even set that as yet. I have been in and out of tuner studio and do not remember seeing a setting called initial timing or a procedure. Please forgive my inexperience, really steep learning cure, so many new things to get up to speed with. I did do the trigger wheel setting for my 60-2 crank wheel and under cranking I set the skip pulses to 20. So I am wondering if that is what you meant